Alovexiong 4 Pack Carbon Steel Plasterboard Ceiling Hooks Spring Toggle Wing Bolts Hanger Wall Ceiling Installation Cavity Wall Fixing Anchors Ceiling Hook Heavy Duty Swag Hanging Plants

Product Information

Metal spring toggles offer the best support for hanging on a plasterboard wall. The metal toggle is squeezed flat and pushed through the drilled hole in the plasterboard. Once it is behind the plasterboard, the toggle springs open and the two wings pull flat against the inside face. As the supplied machine screw is tightened, the wings are pulled tight against the inside face and spread the weight of the load. Decide where you’ll be installing the ceiling hook for your plant and make a small mark with a pencil. Step 2 I have a potted plant (approx 5kg/10lbs) that I wish to hang from a drywall ceiling of a window aisle. Hanging a plant hook using a ceiling joist is the most secure way and the safest, especially if you plan to hang a heavy planter. Materials:

Ceiling Board Hanger - The best way to install plasterboards

If you have a crawl space or an attic with exposed joists, look to see which direction the joists are laid and also how far apart they're spaced. but maybe I need several anchors just to make sure weight is distributed, or maybe I should use a different kind of screw/attachment?If you don’t want to go through the trouble of finding a joist, or there isn’t a joist where you want to hang your plant, you can use a toggle bolt with the hook. (Just make sure your plant isn’t heavier than the specified weight limit for your ceiling hook.) It sounds intimidating, but it’s actually very easy!

4 Pack Carbon Steel Plasterboard Ceiling Hooks Spring Toggle

I’m Amanda, and I am the creator and voice behind the food and DIY blog, Domestically Creative. What started as a place to share updates with friends and family after we moved from Illinois to Tennessee and then to Texas, turned into a passion for finding creative and frugal ways to feed us and decorate our homes. Plasterboard Fixings– When hanging anything heavy from a plasterboard wall, it is always better to use more fixings than you might normally need. Using four plasterboard fixings instead of, say, two fixings, will greatly help to spread the load of the wall unit, shelf, etc, and therefore reduce the chance of the fixings pulling out of the wall. DIY Extra is an ever-growing collection of Do It Yourself guides, projects, tutorials and articles covering many aspects of DIY and Home Improvements. All plasterboard fixings are designed to do basically the same thing: Increase the area of the plasterboard which is put under stress by the object hanging from it. However, not all of them do this in the same way and not all of them are suitable for all applications. As a general rule, use plastic or metal screw in fixings for light loads, plastic anchor or spring toggles for medium loads, and metal spring toggles for heavy loads. Plastic Expanding Anchors

These plasterboard screws combine a metal or nylon plug with a screw thread for the fixing screw. They vary in size and length but they all have the deep outer thread in common. The deep thread is designed to give a much better grip on the plasterboard, whilst also spreading the weight of the object they are holding up. Suitable for light loads and plasterboard in good condition. Plasterboard Plug These relatively new plasterboard fixings are available in a variety of colours, each capable of holding different maximum weights. These range from blue (113kg) to yellow (71kg). GripIt fixings work by having three separate loading points, dispersing the weight of the object being held better than many traditional fixings. They are only really suitable for use in places where they will be hidden behind the fixture. A large hole needs to be drilled, and the GripIt sits flush at the edge and is clearly visible. You can find out more about GripIt fixings here.

Ceiling Hooks,Ceiling Plasterboard Mount Hook JINXM 10 Pcs Ceiling Hooks,Ceiling Plasterboard Mount Hook

Decide where you will install the hook. Grab the stud finder to locate a joist in that area. Don’t have a stud finder, try one of these 5 Ways to Find a Stud without a Stud Finder. Make several passes to ensure you know exactly where the joist begins and ends, and mark the area accordingly. Step 2 These plastic plugs are not much different from standard wall plugs, except that they are generally shorter and wider, and they spread more when the fixing screw is inserted and tightened. Cheap and easy to use, but only suitable for light loads. As with a normal wall plug, a hole of the correct size needs to be drilled into the plaster (slightly smaller than the plug) before the plug is inserted. Poly-Toggle or Nylon ToggleAssess the weight of the suspended item. Estimating the weight of the item you want to hang from the ceiling will determine what size fastener you need. Hanging a paper lantern will require a different fastener than hanging a large, heavy pendant lamp. There are various sizes of hook screws. If your item is small, use cup hooks or, even smaller, screw eye hooks. I have previously attached shelves and all kinds of things to drywall WALLS, no problem, and also reading here I mostly found about attaching/hanging things to/from walls, too, but I am a bit concerned about how much would a drywall plate be able to hold something hanging straight down from it.