NETGEAR GS752TP Switch Niv.2 48 ports Gigabit PoE + 4 SFP 512W

Product Information

Temperature-based fan-speed control minimizes system acoustic noise in any environment starting at 27.08dB at 25°C (77°F) ambient. Centralized network configuration (policies) across Insight managed switches, and access points for VLANs, ACLs, QoS, LAGs, etc. Smart Control Center, a powerful tool for multi-switch discovery, deployment, monitoring and firmware upgrade Facilitate fast receiver joins and leaves for multicast streams. Save cost and improve network efficiency by ensuring multicast traffic only reaches designated receivers without the need of an extra multicast router. The NETGEAR® new generation Gigabit 52 port (48 port copper + 4 port fibre) PoE Smart Switch offers powerful L2 features, better PoE functions, and enhanced performance and usability. The GS752TP come with PoE capabilities on all ports, providing hardware investment protections so that the switch can support many more PoE powered devices and new higher-powered devices down the road. It is purposely designed for the converged networks where voice, video, data are all carried on a single network platform for network efficiency, operational cost savings, and ease of management.

These eight port PoE + two fibre uplinks (you'll need SFP+ modules to use them) switches are a great choice for the more advanced home network or office setup. They are ideal for powering IP cameras, phones, wifi access points and other such devices. Insert a straightened paper clip or a similar device into the hole of the Factory Default button and hold for two to three seconds. Apply settings and policies on multiple ports across multiple switches all at the same time using the Port Config WizardCentralized network configuration (policies) across Insight managed switches, and wireless access points for VLANs, ACLs, QoS, and LAGs Build current network with future in mind. Ensure investment protection and a smooth migration to IPv6-based network without switch replacement. Networking standards IEEE 802.1D, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3af, IEEE 802.3at, IEEE 802.3x A simple way to provide segmentation of the network with internal routing through the switch – reserving the router for external traffic routing only, making the entire network more efficient.

IP phones and PCs can authenticate on the same port but under different VLAN assignment policies. Users are free to move around and enjoy the same level of network access regardless of their physical location on the network. Support high-density VoIP, Surveillance and Wi-Fi AP deployments, scalable for future growth. Never face the risk of running out of PoE ports. Advanced controls for optimised network performance and better delivery of mission-critical traffic such as voice and video. Advanced controls for optimized network performance and better delivery of mission-critical traffic such as voice and video.Energy Efficient Ethernet (IEEE802.3az) support for more energy saving in the future when more EEE-compliant end devices come to market It's quiet, switches data fast and works well, as long as you do your research first about VLANS and Trunking and design your network. The management interface isn't very fast, but after initial setup you only need to tweak stuff here and there. Full-fledged local or remote access for configuration, management, and monitoring on a larger display using your tablet, laptop, or desktop computer through the NETGEAR Insight Cloud portal Four dedicated Gigabit SFP ports for aggregation to the network core. Support for fibre and Copper modules. Can also build dual redundancy by a trunked uplink with link aggregation and failover. Auto Video VLAN, following the same concept of Auto Voice, help speed up your deployment of IP-based surveillance system

Be careful not to mix it up with the Reset button. The Reset button restarts the switch, it does not restore it to factory default settings. If you press the Factory Default button too long, some switches change to recovery mode, signified by the LED light turning from green to amber. If this happens, power cycle the switch or press the Reset button to reboot the device. L'alimentatore esterno (bello grosso, visto che deve alimentare ben 8 dispositivi PoE) è un'altra scelta che non condivido. Worry-free NETGEAR limited lifetime warranty, online technical chat support and Next Business Day (NBD) replacement.

At a Glance:

L2/L3/L4 access control lists (ACLs) for granular network access control including 802.1x port authentication a) It uses the same management software as bigger brothers such as the GS724T so I can see everything from one view. Auto-join and configure (zero-touch provisioning) for additional Insight managed devices added to the network Ha due slot per inserire moduli SFP per le fibre ottiche, da comprare a parte (questa caratteristica non l'ho ancora testate: a casa non ho una rete in fibra) As a leading provider of network equipment for SMBs, NETGEAR understands the importance of providing a great choice of PoE port counts and power budgets that can adapt to your business’ needs, whether in the hospitality, catering, education or retail domains. The GS728TP, GS728TPP, GS752TP, and GS752TPP Gigabit Ethernet switches with PoE+ and 4 SFP ports join the NETGEAR standalone Smart switches family, adding full 24 and 48 port PoE+ support for deployment of modern high-power PoE devices. Cautious spender organizations can now deploy denser PoE+ devices connected to a cost-effective switch, with a reasonable PoE power budget of 190W over 24-port, or 380W over 48-port. Organizations who buy infrastructure for the long term and want future proofing for the unforeseeable can now select a switch with a PoE power budget of 380W over 24-port, or 760W over 48-port providing more headroom.